10 MHz Frequency Output |
Please Refer To The 10 MHz Frequency Output Table On Datasheet.
|
1PPS Output |
Please Refer To The 1PPS Output Table On Datasheet.
|
Timing Signals |
10 MHz Output (BNC).
SW Configurable Timing Output (BNC):
• TTL Output (1 PPS, xPPS, IRIG DCLS, HAVE QUICK).
SW Configurable Timing Input/Output (HD-15):
• TTL Input/Output (1 PPS, xPPS [output only], IRIG DCLS, HAVE QUICK).
• RS-232 Input/Output (NMEA, ASCII ToD).
• RS-485 Input/Output (1 PPS, xPPS, IRIG DCLS, HAVE QUICK, NMEA, ASCII ToD).
• IRIG AM Output.
|
Timing |
NTP v2, v3, v4:
– Conforms with RFC 1305 and 5905.
– Supports Unicast, Broadcast, Multicast, MD5 encryption,
Peering, Stratum 2.
SNTP v3, v4:
– Conforms with RFC 1769, 2030, 4330, and 5905.
PTP v2:
– Conforms with IEEE 1588:2019. Supports Master,
Slave, E2E, IPv4/v6, Multicast, Unicast, Hybrid modes.
|
Management |
IPv4/IPv6:
– Dual stack.
DHCPv4/DHCPv6 (AUTOCONF)/SLAAC:
– Automatic IP address assignment.
Authentication:
– LDAP, RADIUS, TACACS+.
Syslog:
– Logging.
SNMP:
– Supports v1, v2c, and v3 (no auth/auth/priv) with
Enterprise MIB.
|
Communications |
HTTP:
– Browser-based configuration and monitoring.
Telnet:
– Remote configuration.
FTP Server:
– Access to files (logs, etc.).
SMTP:
– Email.
|
Security Features |
Enable/Block protocols.
Set SNMP community names and network access.
Password protected.
Standard encryption/authentication protocols.
Alert notifications via SNMP traps and email.
SSL Web-based Interface:
– SSL is used to secure HTTPS protocol to access configuration and status web pages.
SSH:
– SSL and data compression technologies provide a
secure and efficient means to control, communicate with
and transfer data to or from the time server remotely.
SCP:
– Securely transfers files to and from the time server
over an SSH session.
SFTP:
– FTP replacement operates over an encrypted SSH
transport.
SNMP v3: Remotely configure and manage over an
encrypted connection.
|
GNSS Receiver |
Connector:
– Type SMA with Type N cable adapter, +5V to
power active antenna (+3.3V for optional SAASM).
Frequency:
– GPS L1 (1575.42 MHz).
– Galileo E1 (1575.42 MHz).
– GLONASS L1 (1602.0 MHz).
– BeiDou B1 (1561.1 MHz).
– QZSS L1 (1575.42 MHz).
Optional SAASM:
– GPS L1 & L2 (1227.6 MHz).
Satellite tracking:
– 1 to 72, T-RAIM satellite error management.
Synchronization time:
– Cold start < 15 minutes (includes almanac download).
– Warm start < 5 minutes (assumes almanac downloaded).
Antenna system:
– Sold separately, included with SAASM GPS.
|
Oscillator |
Standard Oscillator:
– OCXO.
Optional Oscillators:
– TCXO, Rubidium (Rb).
|
Network Port |
Dual Gb Ethernet (RJ-45 / SFP).
|
Serial Set-up Interface |
RS-232 communications on front panel micro USB, rear
panel RJ-45.
|
Front Panel |
LED segments for time display.
OLED menu display and keypad for status and basic
configuration.
LED status buttons with one-click menu access.
|
Power |
Fixed 100-240 VAC, 50/60 Hz, ±10% from IEC60320
connector; power cord included.
Optional: Dual hot-swap power with load-sharing and
failover.
|
Power Draw |
TCXO:
– 40 W normal (50 W start-up).
OCXO:
– 40 W normal (50 W start-up).
Rubidium:
– 50 W normal (80 W start-up).
|
Environmental |
Please Refer To The Environmental Table On Datasheet.
|
Agency Approvals |
CE, TUV, cTUV, FCC part 15 class A, ROHS, WEEE.
|
Size / Weight |
Designed for EIA 19” rack. 18.75” W x 1.74” H (1U) x 15.13” D
actual (476 mm W x 44 mm H x 384 mm D actual).
Weight:
– 9.0 lbs. (4.08 kg) with Rubidium option.
– 8.5 lbs (3.86 kg) without.
Front rack mount hardware included (assembly required).
|
Warranty |
Five Year Limited Warranty*
Oscillator for rubidium option is warranted for two years.
Extended warranty is available.
|